
DSP troubleshooting tips
Complete loss of audio
Step 1. Use Multi-Channel input jacks at rear.
Step 2. Switch unit to Multi-Channel.
Step 3. If audio returns, unit has a DSP ASSY problem. If still no
audio, remove DSP ASSY board and repeat steps 1 and 2. If audio
returns, probable cause…DSP ASSY.
Step 4. If unit still has no audio, probable cause is VR & PRE OUT
ASSY and beyond.
Step 5. To further isolate the problem, remove Main in/ Preout
jumpers and insert audio directly into Main in, front
channel. If still no audio, unit has amplifier problem.
Don’t forget to reinsert jumpers!
Kommentare zu diesen Handbüchern